Brother MFC 7840W User Manual

Page 82

Text mode
Original mode

Wireless configuration for Macintosh

using the Brother installer application

To communicate with the configured wireless device, you must configure your computer to use the same
wireless settings. Manually change the wireless settings on your computer to match the machine’s
wireless settings shown on this screen. Check the box after you confirm these settings, and then click
Next.
(The settings shown on this screen are for example only. Your settings will not be the same.)

Check the box after you confirm that you have completed the wireless settings, and then click Finish.

You have completed the wireless network setup. If you would like to continue installing drivers and
software necessary for operating your device, please choose Start Here OSX from the CD-ROM
menu.