Brother MFC 7840W - Manual (Page 23)

Configuring your machine for a network
14
2
c Double-click the unconfigured device.
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the node name and Ethernet address (MAC address) by printing the Network Configuration
List. See Printing the Network Configuration List on page 87.
d
Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of
your print server.
e
Click OK.
f With the correctly programmed IP address, you will see the Brother print server in the device list.
Windows ® Macintosh ®
Windows
®
Macintosh
®