Brother MFC-795CW - Manual (Page 42)

Chapter 3
26
Speaker Volume
3
You can choose a range of speaker volume
levels, from High to Off.
a
Press MENU.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display Volume.
e
Press Volume.
f
Press a or b to display Speaker.
g
Press Speaker.
h
Press Low, Med, High or Off.
i
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Speaker Phone.
a
Press Speaker Phone.
b
Press d or c to display Volume.
c
Press Volume.
d
Press or .
This setting will stay until you change it
again.
e
Press Speaker Phone.
Note
• You can adjust the speaker volume while
you are listening to your outgoing
message (OGM) and incoming messages
(ICM’s) by pressing
or .
• If you turn Incoming Recording Monitor to
OFF the Speaker for screening calls will
be disabled and you won’t hear callers
leaving messages. The volume for other
operations can still be controlled using
or .
Handset Volume
3
a
Press MENU.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display Volume.
e
Press Volume.
f
Press a or b to display Handset.
g
Press Handset.
h
Press Low or High.
i
Press Stop/Exit.
Note
You can adjust the handset volume any
time you are talking on the telephone.
There are two handset volume levels, Low
and High. The default setting is Low.
Press or to adjust the volume
level. The LCD shows the setting you are
choosing. The new setting will remain until
you change it again.