Brother MFC-795CW - Manual (Page 125)

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
109
13
Printing Photos
13
Before you can print an individual image, you
have to know the image number.
a
Make sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (Photo Capture).
b
Print the Index. (See Print Index
(Thumbnails) on page 108.)
c
Press Index Print.
d
Press Print Photos.
e
Enter the image number that you want to
print from the Index page (Thumbnails).
After you have chosen the image
numbers, press OK.
Note
• You can enter multiple numbers at one
time by using a comma or a hyphen. For
example, Enter 1, 3, 6 to print images
No.1, No.3 and No.6. Enter 1-5 to print
images No.1 to No.5.
• You can enter up to 12 characters
(including commas) for the image
numbers you want to print.
f
Enter the number of copies you want
either by pressing the number box
directly and enter the number you want
or pressing + or -.
g
Do one of the following:
„ Press Print Setting to change
the print settings. (See page 112.)
„ If you do not want to change any
settings, press Color Start to print.
Enhance Photos
13
You can edit and add effects to your photos
and view them on the LCD before printing.
Note
The Enhance Photos feature is supported
by technology from Reallusion, Inc.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b
Press Enhance Photos.
Note
• Press d or c to scroll through all photos.
You can forward and rewind the
thumbnails by holding these keys. The
photo is not shown during this operation.
• Eight thumbnails are displayed at a time
with the current page number and total
number of pages listed under the
thumbnails.
• Press to start Slide Show.
c
Press a photo from the thumbnails.
d
Press Enhance or Trim. You can also
choose both together. Press OK.
e
Do one of the following:
„ If you chose Enhance, go to step f.
„ If you chose Trim, go to step g.