Cleaning the print head, Checking the print quality, Cleaning the print head checking the print quality – Brother MFC-795CW User Manual
Page 183: Important, Bcleaning the print head
Troubleshooting and Routine Maintenance
167
B
Cleaning the print head
B
To maintain good print quality, the machine
will automatically clean the print head when
needed. You can start the cleaning process
manually if there is a print quality problem.
Clean the print head and ink cartridges if you
get a horizontal line in the text or graphics or
blank text on your printed pages. You can
clean Black only, three colors at a time
(Cyan/Yellow/Magenta), or all four colors at
once.
Cleaning the print head consumes ink.
Cleaning too often uses ink unnecessarily.
IMPORTANT
DO NOT touch the print head. Touching
the print head may cause permanent
damage and may void the print head's
warranty.
a
Press .
b
Press Cleaning.
c
Press Black, Color or All.
The machine cleans the print head.
When cleaning is finished, the machine
will go back to the Ready Screen
automatically.
Note
If you clean the print head at least five
times and the print has not improved, try
installing a new Genuine Brother
Innobella™ replacement cartridge for
each problem color. Try cleaning the print
head again up to five more times. If the
print has not improved call Brother
Customer Service. (See Brother numbers
on page i.)
Checking the print quality
B
If faded or streaked colors and text appear on
your output, some of the nozzles may be
clogged. You can check this by printing the
Print Quality Check Sheet and looking at the
nozzle check pattern.
a
Press .
b
Press Test Print.
c
Press Print Quality.
d
Press Color Start.
The machine begins printing the Print
Quality Check Sheet.
e
Check the quality of the four color blocks
on the sheet.
f
The LCD asks you if the print quality is
OK.
Do one of the following:
If all lines are clear and visible, press
Yes to finish the Print Quality check
and go to step j.
If you can see missing short lines as
shown below, press No.
g
The LCD asks you if the print quality is
OK for black and three colors.
Press Yes or No.
h
The LCD asks you if you want to start
cleaning.
Press Color Start.
The machine starts cleaning the print
head.
OK
Poor