Brother MFC-795CW - Manual (Page 132)

Chapter 13
116
Setting your changes as the
new default
13
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Choose the print settings and options
you want to store.
b
After changing the last setting, press
a
or b to choose Set New Default.
c
Press Set New Default.
d
Press Yes to confirm.
e
Press Stop/Exit.
Restoring all settings to the
factory settings
13
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press Print Setting.
b
Press a or b to display
Factory Reset.
c
Press Factory Reset.
d
Press Yes to confirm.
e
Press Stop/Exit.
Scan to a memory card
or USB Flash memory
drive
13
Entering Scan mode
13
When you want to scan to a memory card or
USB Flash memory drive, press (Scan).
The LCD shows:
Press Scan to Media.
If you are not connected to your computer
only the Scan to Media selection is available
on the LCD.
(See Using the Scan key for Windows
®
or
Macintosh in the Software User’s Guide on
the CD-ROM for details about the other menu
options.)
S c a n t o
E - m a i l
S c a n t o
F i l e
S c a n t o
I m a g e S c a n t o
O C R
S c a n t o
M e d i a
S C A N S C A N