Brother MFC-9325CW - Manual (Page 77)

Control panel setup
66
6
Relay Report
6
A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay
Broadcasts.
Its primary function is to print reports of any relayed broadcasts that have been sent through the machine.
Please note: In order to use this function, you must assign the relay domain in the “Trusted Domains” section
of the Relay function settings.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Relay.
Press OK.
e Press a or b to choose Relay Report.
Press OK.
f Press a or b to choose On or Off.
Press OK.
g Press Stop/Exit.
Note
For more information on Relay Broadcast, see Relay broadcast from a computer on page 107.
How to set a new default for Scan to E-mail (E-mail server)
(available as a download)
6
You can choose the default color file type for the Scan to E-mail (E-mail server) function. (For the details on
how to operate Scan to E-mail (E-mail server), see Internet fax and Scan to E-mail (E-mail server)
on page 102.)
Note
In order to use this function, please download the necessary software from the download page in the
Brother Solution Center. (http://solutions.brother.com/)
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose Scan To E-mail.
Press OK.