Brother MFC-9325CW - Manual (Page 127)

Security features
116
13
d Click Network Configuration.
e Enter a user name and a password. The default User Name is “admin” and the default Password is
“access”.
f Click OK.
g Click Configure Protocol.
h Make sure that the SNMP setting is enabled, and then click Advanced Setting of SNMP.
i
You can configure the SNMP settings from the screen below.
We have three SNMP connection modes of operation.
 SNMPv3 read-write access
With this mode the print server uses version 3 of SNMP protocol. If you want to manage the print server
securely, use this mode.
Note
When you use the SNMPv3 read-write access mode, please note the following.
• You can manage the print server by using BRAdmin Professional 3, Web BRAdmin or Web Based
Management (web browser) only.
• We recommend secure SSL communication (HTTPS) be used.
• Except for BRAdmin Professional 3 and Web BRAdmin, all applications that use SNMPv1/v2c will be
restricted. To allow the use of SNMPv1/v2c applications, use
SNMPv3 read-write access and v1/v2c read-only access or SNMPv1/v2c read-write access
mode.