Brother MFC-9325CW - Manual (Page 111)

Web Based Management
100
11
Changing the Scan to Network configuration using a web
browser
11
Scan to Network allows you to scan documents directly to a shared folder on a CIFS server located on your
local network or the Internet. (For more information on CIFS protocol, see Protocols on page 8.) To enable
the CIFS protocol, check the box for CIFS from the Network Configuration page. (See Chapter 12 in the
Software User’s Guide for more details on Scan to Network.)
Note
Scan to Network supports Kerberos Authentication and NTLMv2 Authentication.
a
Click Administrator Settings on the MFC-XXXX web page, and then click
FTP/Network Scan Settings.
b
You can choose what profile numbers (1 to 10) to use for Scan to Network settings.
c Click FTP/Network Scan Profile on Administrator Settings page.
Now you can configure and change the following Scan to Network settings using a web browser.
 Profile Name (Up to 15 characters)
 Host Address
 Store Directory
 File Name
 Quality
 File Type
 Use PIN for authentication
 PIN Code