Brother FAX-2800 - Manual (Page 80)

7 - 5 A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
Speed Dialing
1
Pick up the handset—OR— Press Hook.
2
When you hear a dial tone, press Search/Speed Dial, press #, and then press
the two-digit Speed Dial location. (See
Storing Speed Dial Numbers , page 7-2.)
3
If you pressed Hook to dial the call, pick up the handset when the other party
answers. (The speaker works only one way; the other party won’t be able to hear
you unless you pick up the handset.)
4
To hang up, replace the handset.
One Touch Dialing (For FAX-2800 Only)
1
Pick up the handset—OR— Press Hook.
2
When you hear a dial tone, press the One Touch key of the location you will
want to call.
(See
Storing One Touch Dial Numbers (For FAX-2800 Only) , page 7-1.)
3
If you pressed Hook to dial the call, pick up the handset when the other party
answers. (The speaker works only one way; the other party won’t be able to hear
you unless you pick up the handset.)
4
To hang up, replace the handset.
Note
If you are sending a fax, press Fax Start after entering the Speed Dial number.
If you picked up the handset, press Fax Start when the receiving fax machine
answers with fax tones.
If you try to use a One Touch location with no number stored in it, you will hear
a warning sound, and the LCD will show
NOT REGISTERED for 2 seconds.
Note
If you are sending a fax, press Fax Start after pressing the One Touch key. If
you picked up the handset, press Fax Start when the receiving fax machine
answers with fax tones.