Brother FAX-2800 - Manual (Page 60)

5 - 2 S E T U P R E C E I V E
To Select or Change Your Receive Mode
1
Press Receive Mode. The LCD shows your active setting.
2
Continue to press Receive Mode until your new selection appears. After two
seconds, the LCD returns to the date and time and shows the new Receive Mode.
Setting Ring Delay
The Ring Delay setting determines the number of times the FAX/MFC rings
before it answers. If you have extension phones on the same line as the FAX/
MFC, keep the Ring Delay default setting of 04. (See
Easy Receive , page 5-3 and
Operation from Extension Telephones and page For FAX/TEL Mode Only , page 5-
5.)
1
Press Menu/Set, 2, 1, 1.
2
Press to select how many times the
line rings before the FAX/MFC answers (00–04), and then press Menu/Set.
If you select 00, the line doesn’t ring at all.
3
Press Stop/Exit.
If you are changing the Receive Mode while in another operation, the LCD
returns to that operation.
FAX/TEL
FAX ONLY
TAD:ANSWER MACH.
MANUAL
09/06 15:25 FAX
Current Receive Mode
1.RING DELAY
or