Brother FAX-2800 - Manual (Page 77)

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S 7 - 2
Storing Speed Dial Numbers
You can store Speed Dial numbers, so when you dial you will have to press only
five keys. (Search/Speed Dial, #, the two-digit location, and Fax Start) The
FAX/MFC has 100 Speed Dial locations.
1
For the FAX, press Menu/Set, 2, 3, 2.
For the MFC, press Menu/Set, 2, 3, 1.
2
Use the dial pad to enter a two-digit
location (00-99), and then press
Menu/Set.
3
Enter the number (up to 20 digits), and
then press Menu/Set.
4
Use the dial pad to enter the name (up to
15 characters), and then press Menu/Set.
You can use the chart on page 4-2 to help
you enter letters—OR—Press Menu/Set to store the number without a name.
5
Return to Step 2 to store another Speed Dial number—OR—Press Stop/Exit.
Changing One Touch (For FAX-2800 Only) and Speed
Dial Numbers
If you try to store a One Touch (FAX-2800)
or Speed Dial number in a location where a
number is already stored, the LCD shows
the current name stored there, and then prompts you to either:
1
Press 1 to change the stored number—OR— press 2 to exit without making a
change.
2
Enter a new number, and then press Menu/Set.
• If you want to erase the whole number, press Stop/Exit when the cursor
is to the left of the digits. The letters above and to the right of the cursor
will be deleted.
• If you want to change a digit, use or to position the cursor under
the digit you want to change, and then type over it.
3
Follow the directions beginning at Step 4 in Storing One Touch Numbers
(FAX-2800) and Storing Speed Dial Numbers.
(For USA Only) For the MFC-4800, Speed Dial #01 has been pre-programmed for
the Brother fax-back system. Speed Dial #02 has been pre-programmed for the
CallManage long distance plan. You can override them if you wish.
#05:
NAME:
1.CHANGE 2.EXIT