Brother MFC-7820N - Manual (Page 59)

Setup Receive
4 - 3
4
Setting the F/T Ring Time
(Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel,
you’ll need to decide how long the MFC will
signal you with its special pseudo/double-ring
when you have a voice call. (If it’s a fax call,
the MFC receives the fax.)
This pseudo/double-ring happens after the
initial ringing from the phone company. Only
the MFC rings and no other phones on the
same line will ring with the special
pseudo/double-ring. However, you can still
answer the call on any telephone on the same
line as the MFC. (See For Fax/Tel mode only
on page A-4.)
1
If it is not illuminated in green, press
(Fax).
2
Press Menu/Set, 2, 1, 2.
3
Press
▲ or ▼ to select how long the
MFC will ring to alert you that you have
a voice call (20, 30, 40 or 70 seconds).
Press Menu/Set.
4
Press Stop/Exit.
Note
Even if the caller hangs up during the
pseudo/double-ringing, the MFC will continue
to ring for the set time.
Easy Receive
When you use this feature you don’t have to
press Start or the Fax Receive Code
51
when you answer a fax call. Selecting On
allows the MFC to receive fax calls
automatically, even if you lift the handset of
an extension or external phone. When you
see Receiving on the LCD or when you
hear ‘chirps’ through the handset of an
extension phone connected to another
telephone wall jack, just replace the handset
and your MFC will do the rest.
Note
■
If this feature is set to On, but your MFC
does not connect a fax call when you lift
an extension or external phone handset,
press the Fax Receive Code
51.
■
If you send faxes from a computer on the
same phone line and the MFC intercepts
them, set Easy Receive to Off.
■
Selecting Off means you’ll have to
activate the MFC yourself by lifting the
handset of an external or extension
phone, and then press Start on the MFC
—OR—
by pressing
51 if you are not at your
MFC. (See Operation from extension
telephones on page A-4.)
1
If it is not illuminated in green, press
(Fax).
2
Press Menu/Set, 2, 1, 3.
3
Use
▲ or ▼ to select On (or Off).
Press Menu/Set.
4
Press Stop/Exit.
Setup Receive
2.F/T Ring Time
Setup Receive
3.Easy Receive