Brother HL-7050N - Manual (Page 91)

3 - 7 CONTROL PANEL
HL7050_US_UG_FM5.5
Reprint the last job three times
1 Turn the REPRINT function ON by using the control panel
buttons to go to the SETUP menu.
2 Press the Reprint button.
If you print using the driver we have supplied with the printer,
the settings for Job Spooling in the printer driver will take
priority over the settings made on the control panel. For more
information, see Job Spooling in Chapter 2.
■ If you press the Go button twice, the printer will leave the
REPRINT setting.
■ If you want to reprint the data and have pressed the Go
button, the display shows
PRESS SET TO PRINT . Press
the Set or Reprint button to start reprinting, or press Go
again to cancel the reprint job.
If you wait too long to continue the control
panel button operation, the display leaves
the REPRINT setting automatically.
Press + twice.
Press Set or Reprint.
---REPRINT---
COPIES= 1
---REPRINT---
COPIES= 3
PRINTING
---REPRINT---
COPIES= 1