Ram expansion, Ram expansion -13, See 4-13 – Brother HL-7050N User Manual
Page 140
OPTIONS 4 - 13
HL7050_US_UG_FM5.5
RAM expansion
The HL-7050 and HL-7050N printer have 32 MB of standard memory
and two slots for optional memory expansion. You can expand the
memory up to 288 MB by installing dual in-line memory modules
(DIMMs). (The standard memory varies depending on the printer
model and country.)
You can install the following DIMMs:
■
16 MB
Techworks
12456-0001
■
32 MB
Techworks
12457-0001
■
64 MB
Techworks
12458-0001
■
128 MB
Techworks
12459-0001
■
16 MB
Buffalo Technology
12323-0001
■
32 MB
Buffalo Technology
12324-0001
■
64 MB
Buffalo Technology
12325-0001
■
128 MB
Buffalo Technology
12326-0001
In general, the DIMM must have the following specifications:
Type:
100 pin and 32 bit output
CAS lantency:
2 or 3
Clock frequency:
66 MHz or more
Capacity:
16, 32, 64 or 128 MB
Height:
46 mm (1.8 in.) or less
Parity:
NONE
Dram Type:
SDRAM 4 Bank
SDRAM can be used.
■
For more information, call the dealer you bought the printer
from.
■