Brother HL-7050N - Manual (Page 12)

xi
HL7050_US_UG_FM5.5
IMPORTANT - For Your Safety
To ensure safe operation the supplied three-pin plug must be inserted only into a
standard three-pin power outlet that is properly grounded through the standard
electrical wiring.
Extension cords used with this printer must be three-pin plug type and correctly
wired to provide proper grounding. Incorrectly wired extension cords may cause
personal injury and equipment damage.
The fact that the equipment operates satisfactorily does not imply that the power is
grounded and that the installation is completely safe. For your safety, if in any doubt
about the effective grounding of the power, call a qualified electrician.
Disconnect device
You must install this printer near a power outlet that is easily accessible. In case of
an emergency, you must disconnect the power cord from the power outlet to shut off
the power completely.
Caution for batteries
Do not replace the battery. There is a danger of explosion if the battery is incorrectly
replaced. Do not disassemble, recharge or dispose of the battery in fire. Dispose
of used batteries according to local regulations.
Caution for LAN connection
Connect this product to a LAN connection that is not subjected to over voltages.
IT power system (For Norway only)
This product is also designed for an IT power system with phase-to-phase voltage
230V.
Opmerking / Oplaadbare Batterij Recycle Informatie
(For Netherlands Only)
Bij dit product zijn batterijen geleverd. Wanneer deze leeg zijn, moet u
ze niet weggooien maar inleveren als Klein Chemisch Afval.
Geräuschemission / Acoustic noise emission
(for Germany only)
Lpa < 70 dB (A) DIN 45635-19-01-KL2