A - 8 – Brother HL-7050N User Manual
Page 207
A - 8
HL7050_US_UG_FM5.5
You must use the face-up output tray for certain print media.
When looking at this page on the CD-ROM, you can jump to the page
for each printing method by clicking the
in the table.
You can use the control panel Menu buttons to select the priority of
the paper source in the PAPER menu. For more information about
this setting, see Chapter 3.
Media type
Face-down
Face-up
Notes
Plain paper
60 g/m
2
to 105 g/m
2
(16 to 28 lb)
Recycled paper
Bond paper
Thick paper
105 g/m
2
to 150 g/m
2
(28 to 40 lb)
Thicker paper
150 g/m
2
to 200 g/m
2
(40 to 53 lb)
Transparency
Overhead projector
film
Labels
Envelope
Card stock
Thin paper
■
If you print on thick paper that weighs more than 150 g/m
2
(40 lb), use face-up printing.
■
We recommend that you use face-up printing when you
print on transparencies.
■
If the paper is misfeeding or a lot of pages go through at the
same time when you print on small or thick paper, change
the paper thickness switches on the bottom of the paper
tray. For more information, see page 1-22.
i