Brother HL-7050N - Manual (Page 81)

2 - 21 DRIVER AND SOFTWARE
HL7050_US_UG_FM5.5
Automatic Emulation Selection
This printer has an Automatic Emulation Selection feature. When the
printer receives data from the computer, it automatically chooses the
emulation mode. This feature has been set at the factory to ON.
The printer can choose from the following combinations:
You can select the emulation mode manually by using the control
panel Menu buttons to go to the SETUP menu to change the
EMULATION. For more information, see Chapter 3.
EPSON (default) IBM
HP LaserJet
BR-Script 3
HP-GL
EPSON FX-850 HP LaserJet
BR-Script 3
HP-GL
IBM Proprinter XL
When you use the Automatic Emulation Selection, please
remember the following:
■ You must select the EPSON or IBM emulation mode
priority because the printer cannot tell the difference
between them. Since the factory setting is the EPSON
emulation mode, you might need to select the IBM
emulation mode by using the control panel Menu buttons to
go to the SETUP menu to change the EMULATION.
■ Try Automatic Emulation Selection with your application
software or network server. If it does not work properly,
select the emulation mode manually using either the printer
control panel buttons or the emulation selection commands
from your software.