To use the printer safely – Brother HL-7050N User Manual
Page 3
ii
HL7050_US_UG_FM5.5
To use the printer safely
WARNING
There are high voltage electrodes inside the printer. Before you
clean the printer, clear a paper jam or replace parts, make sure you
have turned off the power switch and unplugged the printer from the
AC power outlet.
WARNING
Do not handle the plug with wet hands - it might give you an electrical
shock.
WARNING
After you have just used the printer, some parts inside the printer will
be extremely hot. When you open the front or back cover of the
printer, never touch the shaded parts shown in the illustrations
below.
Inside the printer
Open the face-up output tray
High Temperature
Fuser is HOT!
This manual is related to the following products: