Brother MFC-5895CW - Manual (Page 244)

Network Scanning (For models with built-in network support)
236
12
Scan to File
12
When you choose Scan to File, you can scan a black and white or color document and send it directly to the
Macintosh you designate on your network. The file will be saved in the folder and file format that you have
configured in ControlCenter2 on the designated Macintosh. You can change the Scan configuration. (See
File on page 216.)
a Load your document.
b
Press the (Scan) key.
c
Press a or b to choose Scan to File.
Press OK.
d
Press a or b to choose the destination Macintosh you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination Macintosh
on the control panel.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the
cursor, then use a or b to enter the second digit. Repeat until you have entered all four digits of the PIN
number. Press OK.
e Press Black Start or Color Start.
The machine starts the scanning process.
For Touchscreen models
12
a Load your document.
b Press the (Scan) key.
c Press Scan to File.
d Press a or b to display the destination Macintosh you want to send to.
e Press the destination Macintosh and then press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination Macintosh
on the control panel.
Press OK.
f
Press Black Start or Color Start.
The machine starts the scanning process.