Brother MFC 6890CDW - Manual (Page 53)

Security features
37
4
m
To change the restrictions for this user,
press Enable or Disable for each
operation, as follows:
Press Fax Tx. Then press Enable or
Disable. After you have set Fax Tx,
repeat these steps for Fax Rx,
Copy(Color), Copy(B&W) and Scan.
n
Press and repeat h to m if you
want to change more users and
settings.
o
Press Stop/Exit.
Reset existing restricted users
4
You can reset restricted users one at a time.
a
Press MENU.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display
Function Lock.
e
Press Function Lock.
f
Press Setup User.
g
Enter the four-digit administrator
password using the buttons on the LCD.
Press OK.
h
Press a or b to display the existing
restricted user you want to reset.
i
Press the user you want to reset.
j
Press Reset.
k
Press Yes.
l
Do one of the following:
„ Set a new restricted user. (See
Setting up restricted users
on page 36.)
„ If you do not want to set a new
restricted user, go to step m.
m
Press and repeat h to l if you
want to reset more users.
n
Press Stop/Exit.
Turning Secure Function
Lock on/off
4
Note
Make a careful note of the administrator
password. If you enter the wrong
password, the LCD will show
Wrong Password. Re-enter the correct
password. If you forget it, please call
Brother Customer Service.
Turning Secure Function Lock on
4
a
Press MENU.
b
Press a or b to display
General Setup.
c
Press General Setup.
d
Press a or b to display
Function Lock.
e
Press Function Lock.
f
Press Lock OffiOn.
g
Enter the four-digit administrator
password using the buttons on the LCD.
Press OK.
Turning Secure Function Lock off
4
a
Press User: Public.
b
Press Lock OniOff.
c
Enter the four-digit administrator
password using the buttons on the LCD.
Press OK.