Brother MFC 6890CDW - Manual (Page 113)

Making copies
97
11
Making multiple copies
11
You can make up to 99 copies in one print
run.
a
Press (Copy).
b
Load your document.
(See Loading documents on page 24.)
c
Enter the number of copies you want.
d
Press Black Start or Color Start.
Note
To sort the copies, press d or c to choose
Stack/Sort. (See Sorting copies using
the ADF on page 100.)
Stop copying
11
To stop copying, press Stop/Exit.
Copy settings
11
You can change the copy settings temporarily
for the next copy.
These settings are temporary, and the
machine returns to its default settings
1 minute after copying, unless you have set
the Mode Timer to 30 seconds or less. (See
Mode Timer on page 28.)
If you have finished choosing settings, press
Black Start or Color Start.
If you want to choose more settings, press
d
or c.
Note
You can save some of the settings that
you use most often by setting them as
default. These settings will stay until you
change them again. (See Setting your
favorites on page 106.)
Changing copy quality
11
You can choose from a range of quality. The
factory setting is Normal.
„ Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
„ Normal
Normal is the recommended mode for
ordinary printouts. This produces good
copy quality with good copy speed.
„ Best
Use best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
a
Press (Copy).
b
Load your document.
c
Enter the number of copies you want.