Brother HL-2460 - Manual (Page 81)

CHAPTER 2 DRIVER AND SOFTWARE
2–21
✒ Note
When you use the Automatic emulation selection, note the following:
•
The EPSON or IBM emulation mode priority must be selected, because
the printer cannot distinguish between them. Since the factory setting is
the EPSON emulation mode, you might need to select the IBM
emulation mode in the EMULATION menu in SETUP mode by using the
control panel.
•
Try Automatic emulation selection with your application software or
network server. If it does not work properly, select the emulation mode
manually using either the printer control panel switches or the
emulation selection commands from your software.