Brother HL-2460 - Manual (Page 151)

CHAPTER 4 OPTIONS
4–19
☛ ☛ ☛ ☛ 7.
Connect the flat cable to the main controller board.
Fig. 4-21
☛ ☛ ☛ ☛ 8. Secure the metal plate with the three screws in the order shown.
Fig. 4-22
☛ ☛ ☛ ☛ 9. Install the side cover.
☛ ☛ ☛ ☛
10. Reconnect the interface cable from your computer.
Plug the power cord into the AC outlet, and then turn on the printer.
☛ ☛ ☛ ☛ 11. Format the HDD from the control panel. See Chapter 3 for details.
① ① ① ①
③ ③ ③ ③
② ② ② ②