Brother HL-2460 - Manual (Page 22)

1-2
✒
Note
•
An interface cable is not a standard accessory. Some computers have
both a USB and a parallel port. Please purchase the appropriate cable
for the interface you intend to use.
•
Most existing parallel cables support bi-directional communication, but
some might have an incompatible pin assignments or may not be IEEE
1284-compliant.
•
Do not use a parallel cable that is longer than 3 meters (10 feet).
•
The power cord may differ slightly from this figure depending on the
country where you purchased the printer.
•
If you use a USB cable, make sure it is a high speed twisted cable
(12Mbps), and that you connect it to the USB connector of your PC. Do
not connect the USB cable to the front of your PC or to the iMac's
keyboard.