Brother MFC-8660DN - Manual (Page 93)

Making copies
79
12
f
Choose one of the options below:
„ Press a or b to select the
enlargement or reduction ratio you
want. Press OK.
„ Press a or b to select
Custom(25-400%). Press OK. Use
the dial pad to enter an enlargement
or reduction ratio from 25% to 400%.
(For example, press 5 3 to enter
53%.) Press OK.
g
Press Start.
Note
• The Auto setting is available only when
loading from the ADF.
• Page Layout Options 2 in 1(P), 2 in 1(L),
4 in 1(P), 4 in 1(L) or Poster are not
available with Enlarge/Reduce.
Making N in 1 copies or a
poster (page layout)
12
You can reduce the number of pages for
copies by using the N in 1 copy feature. This
allows you to copy two or four pages onto one
page, which lets you save paper.
You can also make a poster. When you use
the poster feature your machine divides your
document into sections, then enlarges the
sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
Important
12
„ Please make sure the paper size is set to
Letter, A4, Legal or Folio.
„ (P) means Portrait and (L) means
Landscape.
„ You can not use the Enlarge/Reduce
setting with the N in 1 and poster features.
„ You can only make one poster copy at a
time.
a
Make sure you are in Copy mode
.
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press N in 1.
e
Press a or b to select 2 in 1 (P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L), Poster (3 x 3) or
Off (1 in 1).
Press OK.
f
Press Start to scan the page.
If you are making a poster or placed the
document in the ADF, the machine
scans the pages and starts printing.
If you are using the scanner glass:
g
After the machine scans the page,
press 1 to scan the next page.
Flatbed Copy:
Next Page?
a 1.Yes
b 2.No
Select ab & OK
h
Place the next page on the scanner
glass. Press OK.
Repeat g and h for each page of the
layout.
i
After all the pages have been scanned,
press 2 in g to finish.
If you are copying from the ADF:
12
Insert your document face up in the direction
shown below:
„ 2 in 1 (P)