Brother MFC-8660DN - Manual (Page 114)

100
Optional Paper Tray
(LT-5300)
B
An optional lower tray can be installed, and it
can hold up to 250 sheets of 20 lb (80 g/m
2
)
paper.
When an optional tray is installed, the
machine can hold up to 550 sheets of plain
paper.
For setup, see the User’s Guide that we have
supplied with the lower tray unit.
Memory Board
B
This machine has 32 MB of standard memory
and one slot for optional memory expansion.
You can expand the memory up to 544 MB by
installing dual in-line memory modules
(DIMMs). When you add the optional
memory, it increases the performance for
both copier and printer operations.
DIMM types
B
You can install the following DIMM:
„ 128 MB Buffalo Technology
VN133-D128 / VN133-X128
„ 256 MB Buffalo Technology
VN133-D256
„ 512 MB Buffalo Technology
VN133-D512
„ 64 MB TechWorks 12165-0004
„ 128 MB TechWorks 12462-0001
„ 256 MB TechWorks 12485-0001
„ 512 MB TechWorks 12475-0001
Note
• For more information, visit the Buffalo
Technology site at
http://www.buffalotech.com.
• For more information, visit the Techworks
web site at http://www.techworks.com.
In general, the DIMM must have the following
specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 1.25 in. (31.75 mm)
Dram Type: SDRAM 2 Bank
Note
• There might be some DIMMs that will not
work with the machine.
• For more information, call Brother
Customer Service.