Brother MFC-8660DN - Manual (Page 32)

18
3
Mode timer
3
The machine has three mode keys on the
control panel: Fax, Scan, and Copy.
You can set how much time the machine
takes after the last Copy or Scan operation to
return to Fax mode. If you select Off, the
machine will stay in the mode you used last.
Also, this setting sets the time the machine
will change from individual user to public user
when using Secure Function Lock. See
Switching Users on page 28.
a
Press Menu, 1, 1
11.Mode Timer
a
2 Min
5 Min
b Off
Select ab & OK
b
Press a or b to select 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off. Press OK.
c
Press Stop/Exit.
Paper settings
3
Paper Type
3
Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Choose one of the options below:
„ To set the paper type for the
MP Tray press Menu, 1, 2, 1.
„ To set the paper type for Tray#1
press Menu, 1, 2, 2.
„ To set the paper type for Tray#2
press Menu, 1, 2, 3 if you installed
the optional tray.
12.Paper Type
1.MP Tray
a Plain
b Thick
Select ab & OK
b
Press a or b to select Thin, Plain,
Thick, Thicker, Transparency or
Recycled Paper. Press OK.
c
Press Stop/Exit.
Note
• Transparency is not available for the
optional Tray #2.
• You can choose Transparency only if
A4, Letter, Legal or Folio size was
chosen as the paper size.
General setup
3