Brother MFC-8660DN - Manual (Page 116)

102
C
Troubleshooting
C
IMPORTANT
For technical help, you must call the country where you bought the machine. Calls must be
made from within that country.
If you are having difficulty with your machine
C
If you think there is a problem with the way your faxes look, make a copy first. If the copy looks
good, the problem is probably not your machine. Check the chart below and follow the
troubleshooting tips. You can solve most problems by yourself.
If you need additional help, the Brother Solutions Center offers the latest FAQs and
troubleshooting tips.
Visit us at http://solutions.brother.com.
Troubleshooting and
routine maintenance
C
Printing or Receiving Faxes
Difficulties Suggestions
„ Condensed print
„ Horizontal streaks
„ Top and bottom sentences are
cut off
„ Missing lines
Usually this is caused by a poor telephone connection. If your copy looks good,
you probably had a bad connection, with static or interference on the telephone
line. Ask the other party to send the fax again.
Poor print quality See Improving the print quality on page 110.
Vertical black lines when receiving Your machine’s primary corona wire for printing may be dirty. Clean your primary
corona wire. (See Cleaning the corona wire on page 130.)
The sender’s scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
If the problem continues, call Brother Customer Service at
1-877-BROTHER (1-877-276-8437) (in USA) or 1-877-BROTHER (in Canada).
Received faxes appear as split or
blank pages. If the received faxes are divided and printed on two pages or if you get an extra
blank page, your paper size setting may not be correct for the paper you are using.
(See Paper Size on page 19.)
Turn on auto reduction. (See Printing a reduced incoming fax on page 44.)