Brother MFC-8660DN - Manual (Page 133)

Troubleshooting and routine maintenance
119
Toner Life
End The toner cartridge and drum unit
assembly is not installed properly,
or the toner cartridge is used up
and printing is not possible. Do one of the following:
„ Re-install the toner cartridge and drum unit
assembly.
„ Replace the toner cartridge with a new one.
(See Replacing the toner cartridge
(TN-550/TN-580) on page 132.)
Toner Low If the LCD shows Toner Low, you
can still print; however, the
machine is telling you that the toner
cartridge is near the end of its life
and the toner will soon run out. Order a new toner cartridge now.
Too Many
Trays More than one optional tray is
installed. The maximum number of optional trays is one.
Remove any additional trays.
Unable to
Init.
(Initialize)
Unable to
Print
The machine has a mechanical
problem. Turn off the machine ’ s power switch and then
turn it on again. If the error message continues
leave the machine for several minutes and then
try it again. (The machine can be turned off for
up to 4 days without losing faxes stored in the
memory. See Checking if the machine has faxes
in its memory on page 120.)
Unable to
Scan The machine has a mechanical
problem. Turn off the machine's power switch and then
turn it on again. If the error message continues
leave the machine for several minutes before
you try it again. (The machine can be turned off
for up to 4 days without losing faxes stored in the
memory. See Checking if the machine has faxes
in its memory on page 120.)
Document is too long for duplex
scanning. Press Stop/Exit. Use a suitable size of paper for
duplex scanning. See Scan on page 163.
Error Message Cause Action