Brother MFC-8660DN - Manual (Page 84)

70
10
Fax reports
10
Some fax reports (transmission verification
and fax journal) can be printed automatically
or manually.
Transmission verification
report
10
You can use the transmission report as proof
that you sent a fax. This report lists the time
and date of transmission and whether the
transmission was successful (shown as
“OK”). If you select On or On+Image, the
report will print for every fax you send.
If you send a lot of faxes to the same place,
you may need more than the job numbers to
know which faxes you must send again.
Selecting On+Image or Off+Image will print
a section of the fax’s first page on the report
to help you remember.
When the verification report is turned Off or
to Off+Image, the report will only print if
there is a transmission error.
a
Press Menu, 2, 4, 1.
24.Report Setting
1.Transmission
a Off
b Off+Image
Select ab & OK
b
Press a or b to select On, On+Image
Off or Off+Image. Press OK.
c
Press Stop/Exit.
Fax journal
10
You can set the machine to print a fax journal
(activity report) at specific intervals (every 50
faxes, 6, 12 or 24 hours, 2 or 7 days). The
default setting is Every 50 Faxes, this
means that your machine will print the journal
when the machine has stored 50 jobs.
If you set the interval to Off, you can still print
the report by following the steps on the next
page.
a
Press Menu, 2, 4, 2.
24.Report Setting
2.Journal Period
a Every 50 Faxes
b Every 6 Hours
Select ab & OK
b
Press a or b to choose an interval.
Press OK. If you choose 7 days, you will
be asked to choose a day when you
want the 7 day countdown to begin.
c
Enter the time to begin printing, in
24 hour format.
Press OK.
For example: enter 19:45 for 7:45 PM.
d
Press Stop/Exit.
If you select 6, 12, 24 hours, 2 or 7 days, the
machine will print the report at the selected
time and then erase all jobs from its memory.
If the machine’s memory becomes full with
200 jobs before the time you selected has
passed, the machine will print the journal
early and then erase all jobs from memory.
If you want an extra report before it is due to
print, you can print it manually without erasing
the jobs from memory.
Printing reports
10