Lpr printing in microsoft, Windows nt, 0, microsoft – Brother PS-9000 User Manual

Page 37: Windows, 2000 pro and, Microsoft, Print using an lpr port in microsoft, 0 (pt-9500pc only), 2000 pro, And microsoft

LPR Printing in Microsoft

Windows NT

4.0, Microsoft

Windows

2000 Pro and Microsoft

Windows

This section explains how to setup and print with PS-9000 using LPR of Microsoft

Windows NT

4.0,

Microsoft

Windows

2000 Pro and Microsoft

Windows

XP.

Print using an LPR port in Microsoft

Windows NT

4.0

(PT-9500PC only)

Go to “Start” – “Settings” – “Printers”,
and then double-click [Add Printer] to
start up the wizard.

In the following dialog box that
appeared, select “My Computer”, and
then click [Next].

In the following dialog box that
appeared, click [Add Port], and then
create a new port.

• If you have already created a port when

you installed PS-9000, select the port
from the list, and then continue with
step 6.

Select “LPR Port” from the “Available
Printer Ports”, and then click [New Port].

In the “Name or address of server
providing lpd” box, type in the IP address
that was set for PS-9000. In the “Name
of printer or print queue on that server”
box, type in “lp”, and then click [OK].

Note

●

PT-9200DX doesn’t support LPR printing.

Note

●

In order to print using LPR, an LPR port must be added. Go to “Start”

–

“Settings”

–

“Control

Panel”

–

“Network”, and then select “Services”. Click [Add], select “Microsoft TCP/IP Printing”,

and then click [OK]. The component is installed. Restart the computer.