Brother PS-9000 - Manual (Page 18)

17
How to Set Up PS-9000
There are two setup methods available with the Brother PS-9000 Utility.
1
“Installs this unit and the utility.“
With this method, the PS-9000 print server settings are specified and the software for printing on
a network is installed onto the computer. Select this method if the PS-9000 is being used for the
first time after it was purchased or after its settings were reset to the factory default settings.
2
“Installs the utility.“
With this method, only the software for printing on a network is installed onto computers. Select
this setup method if PS-9000 is already set up and the software is being installed onto the second
or more computer.
Caution
● When setting up PS-9000 on an operating system that has administrator privileges (such as,
Microsoft
®
Windows NT ® 4.0, Microsoft
®
Windows
®
2000 Pro or Microsoft
®
Windows
®
XP),
be sure to log in with a user account that has administrator privileges.
Caution
● Install the printing software onto all computers that will use the P-touch connected to PS-9000.
Software License
● Use the software according to the license agreement that appears during installation.
● Install the software onto multiple computers at a single location and use it to print from the
P-touch connected to PS-9000.