Brother PS-9000 - Manual (Page 25)

24
9
Select PS-9000, which is to be set up, and
then click [Next].
• If the product is not displayed in the
list, click [Search].
• If you click [Search Option], the TCP/IP
broadcast address can be configured.
0
Type in the printer port name, and then
click [Next].
• When you assign the printer port name,
make sure that the port name you
specify is not used already (e.g., LPT1:).
• The default port name is
“PTLANxxxxxx:” (where “xxxxxx” is
the last six digits of the Ethernet
address).
a
The setup configuration is displayed.
Click [Finish].
b
When setup is complete, the dialog box
shown bellow appears. Click [Finish].