Brother PS-9000 - Manual (Page 14)

13
1
Use the network cable to connect
PS-9000 to the Ethernet hub.
2
Connect the AC adapter to PS-9000, and
then plug the power cable of the P-touch
and PS-9000 into the electrical outlet.
3
Use the USB cable to connect PS-9000 to
the P-touch. (PS-9000: Type A connector;
P-touch: Type B connector)
4
Turn on the P-touch.
Note
● The USB cable has two different types of
connectors. Be sure to insert the correct
type of connector into the correct port.
■ USB Cable Connectors
Type A Type B
Caution
● Using an AC adapter other than the one
supplied with PS-9000 may result in
damage.
● Do not connect devices other than a
P-touch to the PS-9000 USB port.
● Wait more than 2 seconds between
connecting and disconnecting the USB
cable.
● Do not disconnect the USB cable while
printing.
Note
● The shape of the power cord depends on your model.
P-touch
PS-9000
Ethernet HUB