Brother PS-9000 - Manual (Page 26)

25
Other Functions
Other functions of PS-9000 are as follows.
Automatic IP address
configuration with DHCP/
BOOTP
PS-9000 supports the DHCP/BOOTP protocol.
TCP/IP-related settings can be specified within
the network where the DHCP/BOOTP server is
operating.
Automatic IP address
configuration with RARP
The PS-9000 supports RARP protocol. The IP
address can be set within the network where
the RARP server is operating.
Caution
● PS-9000 supports DHCP/BOOTP
protocols that are in accordance with
RFC2131/2132.
● To use the DHCP/BOOTP function of
PS-9000, contact your network
administrator.
● If the IP address obtained by the PS-9000
from a DHCP/BOOTP server is changed,
printing will no longer be possible. We
recommend using a fixed IP address for
the PS-9000.
Caution
● To use the RARP function of PS-9000,
contact your network administrator.
● If the IP address obtained by the PS-9000
from a RARP server is changed, printing
will no longer be possible. We
recommend using a fixed IP address for
the PS-9000.