Brother PS-9000 - Manual (Page 13)

12
Connection to the Network
■ Prepare the following items.
Ethernet HUB
USB Cable
Network Cable
Caution
● If you have already used PS-9000 on another network or if it had been connected to other
P-touch units, initialize PS-9000 to its factory default settings. You can initialize PS-9000 from
Brother PS-9000 Utility.
● PS-9000 cannot be used with a USB hub.
● If you are using PS-9000 in a 100BASE-TX environment, prepare a 100BASE-TX Ethernet hub
and network cable (Category 5).