Brother DCP-J140W - Manual (Page 8)

Changing your machine’s network settings
4
2
• You can find the Node Name and MAC Address (Ethernet Address) by printing the Network Configuration
Report. (See Printing the Network Configuration Report uu page 27 for information on how to print the
Network Configuration Report on your print server.) You can also find the Node Name and MAC Address
from the control panel. (See Control panel setup uu page 22.)
d
Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of
your print server.
e Click OK.
f When the IP address has been programmed correctly, the device list will show the Brother machine.
Windows
® Macintosh