Function table and default factory settings – Brother DCP-J140W User Manual
Page 33
Control panel setup
29
4
Function table and default factory settings
4
The factory settings are shown in bold.
1
On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network.
Main menu
Submenu
Menu Selections
Options
3.Network
1.TCP/IP
1.BOOT Method
Auto/Static/RARP/BOOTP/DHCP
2.IP Address
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
3.Subnet Mask
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
4.Gateway
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
5.Node Name
BRWXXXXXXXXXXXX= (your machine’s Ethernet
address)
(up to 15 characters)
6.WINS Config
Auto/Static
7.WINS Server
Primary/Secondary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
8.DNS Server
Primary/Secondary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]
9.APIPA
On/Off
2.Setup Wizard
—
(Choose SSID from list or manually add SSID)
3.WPS/AOSS
—
4.WPS w/PIN Code
—
5.WLAN Status
1.Status
(Examples)
Active(11b)/Active(11g)/Active(11n)/
AOSS Active/Connection Fail
2.Signal
Signal:Strong/Signal:Medium/Signal:Weak/
Signal:None
3.SSID
(Shows SSID with up to 32 digits)
4.Comm. Mode
(Examples)
Ad-hoc/Infrastructure
6.MAC Address
7.WLAN Enable
On/Off
0.Network Reset