Function table and default factory settings – Brother MFC-440CN User Manual
Page 65
Appendix A
59
Function Table and Default Factory Settings
A
(For Monochrome Display models)
A
1
On connection to the network, if the machine's BOOT Method is Auto the machine will attempt to automatically set the IP address and Subnet
Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169.254.[001-
254].[000-255]. If the BOOT Method of the machine is set to Static you will need to manually enter an IP address from the machine's control
panel.
2
MFC–5460CN and MFC–5860CN only.
Level1
Level2
Level3
Options
5.LAN
1.TCP/IP
1.BOOT Method
Auto/Static/RARP/BOOTP/DHCP
2.IP Address
[169].[254].[001-254].[000-255]
3.Subnet Mask
[255].[255].[000].[000]
4.Gateway
[000].[000].[000].[000]
5.Node Name
BRN_XXXXXX= (last 6 figures of Ethernet address)
(up to 15 characters)
6.WINS Config
Auto/Static
7.WINS Server
(Primary)
[000].[000].[000].[000]
(Secondary)
[000].[000].[000].[000]
8.DNS Server
(Primary)
[000].[000].[000].[000]
(Secondary)
[000].[000].[000].[000]
9.APIPA
On/Off
2.Setup Misc.
1.Ethernet
Auto/100B-FD/100B-HD/10B-FD/10B-HD
2.Time Zone
UTCXXX:XX
0.Factory
Default