Brother MFC-440CN - Manual (Page 32)

Control panel setup
26
3
Restoring the network settings to factory default
3
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all network settings to the factory default.
(For Monochrome Display models)
3
a Make sure the machine is not operating, then disconnect all the cables from the machine (except the
power cable).
b Press Menu, 5, 0.
c Press 1 to select 1.Reset.
d Press 1 to select 1.Yes.
e The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.
(For Color Display models)
3
a
Press Menu.
b
Press a or b to select LAN.
Press OK.
c
Press a or b to select Factory Reset.
Press OK.
d Press 1 for Factory Reset.
e
Press 1 for Reboot.
Note
For DCP models, press + for Factory Reset and then press + for Reboot.
f The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.