Brother MFC-440CN - Manual (Page 24)

Control panel setup
18
3
Node Name
3
You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will
be the name that is registered by the WINS server on your network. Brother recommends the name
BRN_xxxxxx (where xxxxxx is the last six digits of the Ethernet address) (up to 15 characters).
(For Monochrome Display models)
3
a Press Menu, 5, 1, 5.
b
Select 1 to change. Enter the Node Name.
c
Press OK.
d Press Stop/Exit.
(For Color Display models)
3
a Press Menu.
b Press a or b to select LAN.
Press OK.
c Pressa orb to select TCP/IP.
Press OK.
d Press a or b to select Node Name.
Press OK.
e Press a or b to select Change.
Press OK.
f Enter the Node Name.
Press OK.
Note
DCP models cannot change the Node Name from the control panel menu.
g Press Stop/Exit.