Brother MFC-440CN - Manual (Page 18)

12
3
3
LAN menu
3
The control panel LAN menu section can be used to configure network settings.
Press Menu, then press a or b to select LAN or press Menu, 5 (For Monochrome Display models) and then
proceed to the menu selection you wish to configure.
Please note that the machine is supplied with the BRAdmin Professional Windows
®
software, BRAdmin Light
Macintosh ® software and RemoteSetup which also can be used to configure network settings.
TCP/IP
3
This menu has nine sections: Boot Method, IP Address, Subnet Mask, Gateway, Node Name,
WINS Config, WINS Server, DNS Server and APIPA.
BOOT Method
3
This selection controls how the machine obtains the IP address for itself. The default setting is Auto.
(For Monochrome Display models)
3
a Press Menu, 5, 1, 1.
b
Press a or b to select Auto, Static, RARP, BOOTP or DHCP.
c
Press OK.
d
Press Stop/Exit.
(For Color Display models)
3
a Press Menu.
b Press a or b to select LAN.
Press OK.
c Press a or b to select TCP/IP.
Press OK.
d Press a or b to select BOOT Method.
Press OK.
e Press a or b to select Auto, Static, RARP, BOOTP or DHCP.
Press OK.
f Press Stop/Exit.
Control panel setup
3