Brother MFC-440CN - Manual (Page 16)

Configuring your network printer
10
2
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as an APIPA device in the BRAdmin Professional utility screen.
• You can find the node name and Ethernet address by printing the Network Configuration List. See Printing
the Network Configuration List on page 25 for information on how to print the Network Configuration List
on your print server.
d
Double click the unconfigured device.
e Enter the IP address, Subnet Mask and Gateway (if needed) of your print server.
f Click OK.
g With the correctly programmed IP address, you will see the Brother print server in the device list.
Using the control panel to configure your machine for a network
2
You can configure your machine for a network using the control panel LAN menu. See Control panel
setup on page 12.
Using other methods to configure your machine for a network
2
You can configure your machine for a network using other methods. See Other ways to set the IP address
(for advanced users and Administrators) on page 52.