Messages – Asus V75 User Manual
Page 33
29
Messages
3. Use the joystick to highlight the Add
Number or Add E-mail option then press
the Enter key to confirm.
You can either add an e-mail address or
number manually, or press the left soft
key
to search from the phonebook.
4. After you have entered the recipient(s),
select OK > Option > Done.
5. Use the joystick to highlight and select
Cc, and Bcc recipients. Enter recipients
in these fields in the same way as the To
field.
6. Use the joystick to highlight the Subject
field then press the enter key to confirm.
7. Use the keypad to enter a subject.
To create a slide:
1. To create a slide, use the joystick to
highlight the Edit Content field then
press the enter key to confirm.
You can enter text in the same way as
you would for an SMS message.
2. Press the left soft key
to display the
Option menu.
3. Use the joystick to highlight an option
and press the enter key to confirm.
You can add an image, add an audio file,
attach a file, or change the input method.
4. When your message is complete,
highlight the Done option with the
joystick, then press the enter key to
confirm.
You have just created one slide. Repeat
the process to add more slides.
To send the MMS message:
1. Press the right soft key
to display
the Send menu.
2. Use the joystick to highlight a Send
option, then press the enter key to
confirm.
Viewing an MMS Message
Some MMS messages are longer than the
screen. To move up or down a page, press and
hold the up or down joystick key.
Using Templates
Stored on your phone are templates that
contain texts, images, and sounds. You
can create MMS messages based on these
templates. You can also edit any of the existing
templates.
To use a template:
1. From the main menu, select Messages >
MMS > Templates.
A list of available templates appears.
2. Highlight a template, then select
Options.
Select View to preview the template.
Select Properties to view fields and the
size of the template.
Select Write Message to edit the
message.
3. Edit the To, Cc, Bcc, and Subject fields
as described in the previous procedure.