Asus V75 - Manual (Page 21)

17
Calls
Answering a call
When you receive a call, the phone alerts
you by sounding the ring tone and vibration
according to the specified ring tone and
vibration settings. To answer the call, do the
following:
1. Press the Call key to answer the call.
2. Press the Power/end key to end the
call and disconnect.
You may also select Option > Answer to
answer the call.
Answer mode
The default setting for the phone is to answer
when you press the Call key. However, you
can also set the phone to pick up by pressing
any key. To answer a call by pressing any
key, select Profiles from the main menu, then
choose the profile setting you want.
For example, select Normal, then press the left
soft key
to choose Option > Personalize
> Answer Mode > Any Key. Use the Enter
key to check the Any Key option to enable the
setting.
Press the left soft key
to Save.
Remember to Activate the profile setting to
make sure that the answer mode is set.
Calls
Making a call
To place a call:
1. Enter the number you want to dial using
the keypad. If you make a mistake, select
Clear to delete at any time. The right soft
key
is just under the word Clear on
the lower right screen; select this key to
clear a number.
To cancel the call and return to standby
mode, press the Power/end key.
2. Press the Call key to connect the call
after you finish dialing the number.
To enable the loudspeaker, select H-Free
on the lower right corner of the screen by
pressing the right soft key
.
3. Press the Power/end key to
disconnect the call.
Making international calls
To make an international call:
1. Enter a + by holding down the * key.
2. Enter the international access code for
the country you want to dial, followed by
the area code and the telephone number.