Brother PT-9700PC - Manual (Page 57)

57
* Note:
The number of characters that can be entered (as listed above) is for the maximum vertical
× horizontal cell settings (144 cells × 144 cells). The number of characters that can be
entered may decrease, depending on the specified settings.
③ \\\: End of bar code
There must be three backslashes at the end of 2D bar codes.
Sample input
For data “12345” with symbol type ECC square at 40 × 40 with a 4-dot cell size, the
command will be as shown below.
ESC iD 04h 00h 28h(40d) 28h 00h 00h 00h 00h 00h “12345” \\\