Brother PT-9700PC - Manual (Page 23)

23
ESC X Specify character size
[ASCII] ESC X n
[Decimal] 27 88 n
[Hexadecimal] 1B 58 n
[Parameters] 0≤n≤6 or 30h≤n≤36h
[Description]
・ Specifies the character size.
・ The character size can be set to AUTO or a fixed size (six sizes).
If n=0 (or 30h), the AUTO size is applied.
If n=1 (or 31h), the 4-point size is applied. (21 dots)
If n=2 (or 32h), the 6-point size is applied. (28 dots)
If n=3 (or 33h), the 9-point size is applied. (44 dots)
If n=4 (or 34h), the 12-point size is applied. (56 dots)
If n=5 (or 35h), the 18-point size is applied. (88 dots)
If n=6 (or 36h), the 24-point size is applied. (120 dots)
・ Same as FS Y
ESC i f Apply/cancel a frame (global)
[ASCII] ESC i f
[Decimal] 27 105 102
[Hexadecimal] 1B 69 66
[Parameters] 0≤n≤1 or 30h≤n≤31h
[Description]
・ Applies a frame around the entire text.
If n=0 (or 30h), the frame is cancelled.
If n=1 (or 31h), a frame is applied.
CAN Clear text
[ASCII] CAN
[Decimal] 24
[Hexadecimal] 18
[Parameters] None
[Description]
・ Clears all text, image data and bar codes that were received.