Brother PT-9700PC - Manual (Page 25)

25
Line feed commands
ESC 0 Specify line feed of 1/8 inch
[ASCII] ESC 0
[Decimal] 27 48
[Hexadecimal] 1B 30
[Parameters] None
[Description]
・ Specifies a line feed of 1/8 inch (approximately 0.32 cm).
ESC 2 Specify line feed of 1/6 inch
[ASCII] ESC 2
[Decimal] 27 50
[Hexadecimal] 1B 32
[Parameters] None
[Description]
・ Specifies a line feed of 1/6 inch (approximately 0.42 cm).
ESC 3 Specify line feed of n/180 inch
[ASCII] ESC 3 n
[Decimal] 27 51 n
[Hexadecimal] 1B 33 n
[Parameters] 0≤n≤255
[Description]
・ Specifies a line feed of n/180 inch per text line.
・ If n is less than 24, the line feed amount is set to 24/180 inch (approximately 0.34 cm).