Brother PT-9700PC - Manual (Page 13)

13
Document creation flow
The flow for creating documents is shown below.
A Switch command mode (ESC i a) and Initialize (ESC @)
B Format settings
1. Apply/cancel rotated printing (ESC i L)
2. Specify line feed amount (ESC 0, ESC 2, ESC 3 and ESC A)
C Print operations
1. Specify print position
Specify vertical position (ESC J)
Specify horizontal position (ESC $, ESC \ and ESC a)
2. Transfer print data (one line)
If necessary, transfer text processing codes (see D), bit images, bar codes
and downloaded data (see E).
3. End of line and feed paper (CR and LF)
4. Repeat 1 through 3 described above.
5. End of page, Specify cut setting (ESC i C) and Page feed (FF)
6. Repeat 1 through 6 described above.
7. End of document